APXTDYL-170614-SPB20AContoller
Category: Solar Components  Publish Time: 2018-01-30 14:12 

APXTDYL-170614-SPB20AContoller
GIARIDE 20A 24V 12V LCD Solar Charge Controller PWM Solar Panel Battery Intelligent Regulator with USB Port
Specification:
* Voltage: DC 12V/24V
* Self-consuming: 10MA
* Rated Charge Current: 20A
* Rated Load Current: 20A
* Over charge Protection: 14.4V/28.8V
* Over charge Floating charge: 13.7V/27.4V
* Charge recover voltage: 12.6V/25.2V
* Over discharge Protection: 10.7V/21.4V
* Over discharge Recover: 12.6V/25.2V
* USB output: 5V/3A
* Operating temperature: -35℃-60℃
* Size:150x78x35mm/5.9x3x1.4inch

Note:
1.Make sure your battery has enough voltage for the controller to recognize the battery before first installation.
2. The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries. Let the children keeps far away from the storage battery and the controller.

Caution:
1. Controller should connect the battery first, and then connect the solar panel,and finally the load. The disassembly sequence is contrary to the wiring order.
2. If you got trouble in using, please try to adjust the Float Voltage to 13.7 volts.
--Firstly, you need to long press the "MCU control" button about 3-4 s, and then there will be a management interface on the screen.
--Secondly, you have to press the "Add" button under the screen until the voltage reaches 13.7 volts.
--Lastly, you need to re-press the "MCU control" button again, when the display doesn't blink anymore it saves controller recording the data.

Package Includes:
1 x Solar Charge Controller
1 x User Manual